Micro Software Upgrade; Reboot - Gorgy Timing LEDI 2S NTP Mode D'emploi

5.6. MICRO SOFTWaRE UPGRaDE

this page allow to upgrade the web interface of the clock .
► For this, you shall click on "browse..." select "image.bin" file, provided by After Sales
Service.
► When «image.bin» selected, click on «Upload» button in order to send the updates. A
case will indicate the progress of the file sending.
► When upgrade is finished, the clock will indicate that reboot is required (refer to
Section 5. CONFIgURaTION VIa WeB INTeRFaCe, Chapter 5.7. Reboot).

5.7. REbOOT

this page allows to refresh web page.
► When the user clicks on "reboot" button, he may not have access to web interface
during about one minute.
MDE-LEDI-2S-NTP-1108V1.0 25