Eurotops T02 Mode D'emploi page 121

2. Connect the charging device to a prop-
erly installed, easily accessible socket.
The mains voltage must correspond to
the technical data of the charging de-
vice (see chapter "Technical data").
3. Once connected, the charge progress
bar appears in the battery symbol. The
display illumination automatically deac-
tivates after a certain amount of time.
To activate it, briefl y press any key.
You can use the mobile phone
during the charge process (except
when charging for the fi rst time).
If the rechargeable battery is
completely empty, it may take
some time before the mobile
phone indicates that it is charged
and can be used for calling.
1. Connect the cable
of the enclosed
charging
with the mobile
phone jack.
121
device