PRO-POINT CREEPER Mode D'emploi page 8

8735086
CLEANING
Wipe clean as needed.
the chest deck pad as needed.
LUBRICATION
DO NOT lubricate casters. This can damage the mechanism.
STORAGE
1. Remove the leg lock pins from each leg. Hold the ladder when
removing the second
the pins in the creeper's
2. Push the ladder's angle support arms back towards the ladder.
Lift each leg up until it rests next to the ladder assembly.
3.
4. Store the creeper vertically.
once it is in place.
REMOVAL
Lower each leg.
2. Pull the ladder's
adjustment
Remove the leg lock pins from the pouch.
3.
4. Lift the base frame and push the leg down until it the bolt holes align.
Push the leg lock pin through and turn the end down. Repeat with the
other leg.
5. Unlock the rear casters and it is ready for use.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Visit a Princess
properly or parts are missing. If unable to do so, have a qualified
technician service
8
Foldable
Use mild upholstery
pin as the base frame will fall to the floor. Store
FROM STORAGE
angle support
notch.
Auto Ltd. location
the tool.
Topside Creeper
pouch.
Make sure the rear casters are locked
arms forward to settle in a height
for a solution
For technical
cleaner (not caustic) to clean
if the tool does
questions
Vl.l
not function
call 1-800-665-8685