PRO-POINT CREEPER Mode D'emploi page 7

Vl.l
6. Attach the chest
(C) to the top of the ladder
assembly
chest frame bolts (P) and
lock nut 3s (X) on each side.
Attach the chest deck pad
(D) using two Phillips screws
(S) from underneath.
7. Place the pouch bracket (l)
over the pouch (H) and align
the screw holes. Insert a Phillips screw
(S) through the screw holes. Line up the
protruding screws with the holes in the
deck frame's front. Secure the pouch to
the deck frame
8. Place the foam bumper
each of the angle support
the ladder assembly's
will prevent the ladder from scuffing
the vehicle.
9. Re-check
CARE & MAINTENANCE
Maintain the tool with care. A tool in good condition
1.
to control and will have fewer problems.
2. Inspect the tool components
or worn components.
servicing.
Maintain the tool's labels and name plates. These carry important
3.
information.
replacements.
WARNING! Only qualified
An improperly
and/or others.
Visit www.princessauto.com
Foldable
deck frame
(B) using three
with the screws.
pads (L) over
crosspiece.
and tighten all bolts and screws as necessary.
Only use identical replacement
If unreadable
service
repaired tool may present
for more information
Topside Creeper
c
arms and
This
periodically.
or missing, contact
personnel
is efficient, easier
Repair or replace damaged
parts when
Princess Auto Ltd. for
should repair
a hazard to the user
8735086
s
Fig. 5
s
Fig. 6
the tool.
7