SOUNDMASTER MCD1950 Mode D'emploi page 19

1. Select FM mode.
2. Rotate "ENTER/SCROLL/SELECT" or press and hold "
radio station.
3. You can also press and hold "SCAN" to start AMS (Automatic Memory Storage) all found
station will be stored on the FM presets.
4. If you tune to a FM stereo station, the stereo icon
to a weaker FM station, the reception will automatically switch to mono.
NOTE: In case of noisy stereo signal, you can switch the audio signal in the system settings to
Mono.
1. Select DAB mode.
2. At the first switch on the unit is performing DAB full scan and store the found stations in the
DAB station list
3. Rotate the "ENTER/SCROLL/SELECT" knob or press "
DAB station.
4. To search to new DAB stations press and hold "SCAN" to do a full scan again.
PRESET FUNCTION IN DAB/FM MODE
Preset storing
1. Choose the desired radio station. Press and hold "PROGRAM" for 2 seconds, the preset
station list is shown on the display, press "
2. Press " " on remote control to confirm, 'Preset "x" Saved' will show on the display.
3. Repeat the above 1 - 2 steps to program 40 desired DAB stations or 40 FM stations.
Preset recall
Press "PROGRAM" to recall the preset station list, press "
control to confirm, or use the numeric buttons to choose the preset station.
FM RADIO
will show on the display. If you tune
DAB RADIO
" or " " to choose the desired preset number.
" / "
5
MCD1950 / English Instruction Manual
" or " " to tune the desired
" / " " to choose the desired
" and press " "on remote