Technical Data; Protecting The Environment - Black & Decker GW3030-QS Mode D'emploi

Maintenance
Your Black & Decker appliance has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper appli-
ance care and regular cleaning.
Keep the appliance clean and dry.
u
Remove any leaves stuck to the inside of the vacuum
u
tube.
Regularly clean the ventilation slots with a clean, dry paint
u
brush.
Regularly clean the collection bag and ensure that it is
u
clean and empty after each use.
To clean the appliance, use only mild soap and a damp
u
cloth. Never let any liquid get inside the tool and never
immerse any part of the tool into liquid. Do not use any
abrasive or solvent-based cleaner.
Self lubricating bearings are used in your product, there-
u
fore lubrication is not required.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection. z
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
(Übersetzung der ursprünglichen Anweisungen)
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com

Technical data

Input voltage
Power input
Capacity
Weight (blower)
Weight (vaccum)
Vibration total values (triax vector sum) according to EN 60745:
Vibration (a ) 9.8 m/s
h
GW2810 GW3030
(Type 1) (Type 1)
V
230 230
AC
W
2800 3000
l
50
mm
3.45 3.7
mm
4.85 4.85
2 2
, uncertainty (K) 1.5 m/s
DEUTSCH
GW3050
(Type 1)
230
3000
50 50
3.7
4.85
11