Emerson AVENTICSTM PE5 Notice D'instruction page 15

Fig. 8: DIN rail with mounted pressure sensor
Ø 5,2 mm
14,4 mm
28 mm
Fig. 9: Fix the R412010405 mounting kit with two screws
1
3
2
4
Fig. 10: Center the pressure sensor on the mounting kit and hook it in place
Fig. 11: Mounting kit with mounted pressure sensor
40 +1
Fig. 12: Opening in the control panel
AVENTICS TM PE5 | R412010843-BAL-001-AF | English
max. 5 mm
Fig. 13: Insert the front frame in the cut-out
Fig. 14: Push the pressure sensor onto the front frame
Fig. 15: Attach the mounting kit at the lower mounting clip of the pressure sensor
and let it catch
M = max. 4 Ncm
A
Fig. 16: Fix in place and secure with mounting screws
1
2
M = 2 ± 0,5 Nm
A
Fig. 17: Double nipples for pressure sensor (1 = O-ring, 2 = PTFE sealing ring)
NPT
15