Maintenance - Legend siena Guide D'utilisation Et Garantie

MAINTENANCE_

Clean, adjust, inflate and grease. This is the basic maintenance protocol of a conventional bike, and fully applicable to
the case of an electric bicycle. It is very important to check the bicycle after use to extend the life of the components.
We recommend that you carefully follow the following points:
1. Clean all areas of the bike with rags or paper moistened with soap and water, but not with abrasive products such as
alcohol or turpentine. An air compressor can be of great help.
2. Check the condition of the tyres to ensure that they have no cuts, cracks or embedded objects such as rocks, glass or
sticks.
3. Brake pads must be close to the disk but not touching it; when activating the brake lever with little force, the brake
must act instantly. The pads must be perfectly adjusted to avoid uneven braking and noise.
4. Cables should not be too rigid because material might expand due to temperature variation and usage conditions and,
if forced, it can weaken until breaking point.
5. Make sure the chain runs without friction from elements external to its mechanism.
[EN]
6. Due to the vibrations received during use, we must periodically check the fit of nuts and bolts; mainly on the wheels,
the saddle and the handlebars stem.
7. Grease the bottom bracket bearings and wheel hubs.
8. Do not carry passengers or heavy objects (rear rack load capacity: maximum 27 kg), they can damage the battery and
motor.
Do not use pressurized water.
20