Festool IMPACT TI 15 Guide D'utilisation page 14

3
TI-FX adapter [7]
The TI-FX adapter (sometimes an accessory)
makes possible the fitting of the following attach-
ments on the power tool.
Impact mode is automatically switched off when
the adapter is inserted.
Place the three white points in a row when posi-
tioning the adapter. If necessary, the hexagon
socket holder must be turned manually so the
adapter can be fixed.
Turn the clamping ring as far as the stop to se-
cure the adapter.
14
click
1
2
7
TI-FX
Angle attachment DD-AS [8]
The angle attachment DD-AS (in part, additional
equipment) permits drilling and screwdriving at a
right angle to the machine.
8
DD-AS
Eccentric attachment DD-ES [9]
The eccentric attachment (in part, additional equip-
ment) permits screwdriving near edges with bits
according to DIN 3126.
9
DD-ES
2
1
2
1
2
3
1
3