Cleaning And Maintenance; Technical Service - BALAY 3XP 20 Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Cleaning and Maintenance / Technical Service / Warranty
Cleaning
Prior to use at change of
season

Technical service

Warranty
The appliance is equipped with a main air filter,
6 (fig.
), A (fig.
1
washed with water, dried and refitted on a regular
basis.
The set of accessory purifying filters 7 (fig.
B (fig.
), must be replaced with a new set every
14
year in order to work efficiently. Contact your
supplier.
The filters must be fitted as shown in figs.
Place only one set of filters 7 onto fixture 6 to avoid
affecting cooling efficiency.
The appliance can be cleaned with a cloth or
sponge, warm water and mild detergent.
Never use hot water (more than 40°C), bleach,
petrol-based products, acids or brushes when
cleaning your appliance. Prevent water entering the
appliance.
Do not clean your appliance with a hose.
Clean the main filter and change the additional
purifying filters if necessary.
Clean the casing and the grilles if necessary.
Should your appliance fail to work properly and all the
instructions for use and installation (especially the
section headed "Requirements....") have been
carefully observed, then remember that our Technical
Service Network is at your full disposal.
When contacting the Technical Service, quote the
model code (E-NR) and the appliance's factory
number (FD). This information can be found on
characteristics plate 12, fig.
The conditions of warranty depend on the relevant
Supplier in a particular country. Contact the
establishment where you purchased your appliance
for more information and quote the appliance model
and factory number. The receipt of purchase for the
appliance must be produced prior to any work carried
out under warranty.
35
). This filter must be removed,
14
1
.
),
1
and
.
14
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

3xp 22 série3xp 22 b série

Table des Matières