Warranty Conditions - Bestron PURE&CLEAN AMC1000G Mode D'emploi

WARNING:
• Clean the filter regularly to avoid that the filter becomes clogged and the engine overheated.
• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
• Do not clean the filter in a washing machine.
• Do not dry the filter with a hairdryer.
6
CLEANING AND MAINTENANCE - Cleaning or replacing the exhaust filter
Replace the exhaust filter at least twice a year, and more frequently if the filter
is visibly blocked.
1. Remove the plug from the wall socket.
2. Open the cover of the exhaust filter wheel cap by turning it to the left. Pull
the exhaust filter from the device (see figure 7).
3. Rinse the filter in lukewarm water. Allow it to dry thoroughly.
4. Return the cleaned filter to the appliance. Close the cover, and turn right
until it clicks into place.
WARNING:
• Water could penetrate into the appliance if the filters are not thoroughly
dry. This could result in (electrical) damage.

WARRANTY CONDITIONS

Bestron offers a 60-month warranty on this equipment against defects re-
sulting from manufacturing and/or material errors, subject to the following
conditions.
1. No labour or material costs will be charged during this warranty period.
2. Any repairs carried out under the warranty will not extend the warranty
period.
3. Faulty parts, or in the event of exchange, the faulty equipment itself, will
automatically become the property of Bestron.
4. The warranty is valid for the first buyer only and is non-transferable.
5. The warranty is not valid for damage caused by:
• Accidents
• Improper use
• Wear and tear
• Neglect
• Faulty installation
• Connection to a different mains voltage than indicated on the type plate
• Unauthorised changes
• Repairs carried out by unqualified third parties
• Use in violation with the applicable statutory, technical or safety standards
• Careless transport without suitable packaging or other protection
33
7
EN