newcook Delicious Manuel D'utilisation page 58

4. ProgrAMMing the Pot
If you want to program your programmable pot so that you will have your freshly cooked food at a certain time, when the
display shows "0 0 0 0":
1. Press 'Time', select the remaining time to serve the food, that is, within how many hours you want to eat with
buttons(+) y (-). Mealtime is set at intervals of 10 minutes by pressing the + button increases up to 24 hours.
To select lunchtime, you must tell the programmable pot many hours left for serving food, not the time when you want
to eat, it is important to indicate either the remaining time to eat.
2. Select the menu, the cooking time and the kind of pressure,as it described in the previous section.
3. Confirm selection with the 'Cook' button. The programmable pot automatically calculates when to start cooking so
that the food is freshly made at the scheduled time, if the cooking time is longer than the time remaining before the
scheduled time, your programmable pot will start the cooking cycle, to get as close as possible to the preset time.
4. IMPORTANT: To program a recipe, time must be superior to 1:30 h, otherwise begin cooking pot right then.
During the timeout, the pot will display the time remaining to eat and the red light will turn right.
If while cooking or waiting a power failure occurs, the programmable pot remember its programming and when the current is
back your programmable pot will continue at the same point where the cooking process stopped.
The programmable pot includes the "warm" system which is operated automatically when it stops cooking and keeps the
food warm indefinitely without cooking it again, until you press the CANCEL button. Remember to cancel this function to finish
using your programmable pot.
Programmable pot
58