Electrical Connection; Disposal And Recycling - Dexter HBS20X Traduction Des Instructions D'origine

The optimum storage temperature is between 5 and 30˚C.
Cover the electrical tool in order to protect it from
dust and moisture.
Store the operating manual with the electrical tool.

13. Electrical Connection

The installed electric motor is connected and is ready
to work.
The connection complies with the relevant VDE and
DIN regulations.
The customer­side mains supply and the used exten­
sion line must meet these regulations.
Important information
In the event of an overloading the motor will switch
itself off. After a cool­down period (time varies) the
motor can be switched back on again.
Defective Electric Connection Lines
Often, insulation damages occur on electrical con­
nection lines.
Causes are:
1 Drag marks if connection lines are led through win­
dow or door clearances.
2 Kinks due to improper attachment or routing of the
connection line.
3 Cuts caused by running over the connection line.
4 Insulation damages caused by pulling the connec­
tion line out of the wall socket.
5 Fissures caused by the ageing of the insulation.
Such defective electric connection lines must not be
used and are hazardous due to the insulation dam­
ages.
Regularly check the electrical connection lines for
damages. Please make sure that the connection
lines are disconnected from the mains supply during
the check.
Electrical connection lines must comply with the rel­
evant VDE and DIN regulations. Only use connection
lines labelled with H05VV­F. The labelling of the con­
nection cable with the type specification is required.
AC motor
• The mains voltage must be 220 ­ 240 V~
• Extension cables up to 25 m long must have a
cross­section of 1.5 mm .
2
Connections and repairs of electrical equipment may
only be carried out by an electrician.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine data ­ type plate
• Machine data ­ type plate

14. Disposal and recycling

The equipment is supplied in packaging to preven it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip­
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council
LEROY MERLIN – Rue Chanzy – Lezennes 59712 LILLE Cedex 9 – France
GB 29