Adding a New GPRS/3G/EDGE Connection
Before you start, you should first ask your service provider for the following information:
Name of the access point (APN)
If required, your name and your password
Server IP and port number, if the network uses a proxy server
1. Tap on Apps Settings.
2. Tap on Wireless & networks Mobile networks Access Point Names.
3. Select the desired APN server provided by your mobile operator.
4. If there is no APN configured by your mobile operator, tap the icon in the upper
right corner, and then tap on New APN.
5. Enter the necessary values for the new APN.
6. When finished tap on
7. Tap on the desired APN to select it.
Attention!
You can restore the default APN entries that were originally saved on your
SIM card by pressing the icon in the upper right corner and choosing the
entry "Reset to default".
Activating/Deactivating 3G
The 3G function can only be enabled/disabled via the Airplane mode.
1. Tap on the lower right corner of the taskbar and then on
2. Tap on Airplane mode and then activate the 3G function by tapping on or off.
22
. Your new APN is saved.
.