Preparation For Operation; Operation; Operation By Hand Transmitter; Operation Via Sensors - weinor BiRec On/Off Notice De Montage Et D'installation

4

Preparation for operation

DANGER
Electric shock!
 Danger of injury due to electric current!
Protect yourself against electric shocks. Exercise the necessary caution when dealing
with electricity.
4.1

Operation

4.1.1

Operation by hand transmitter

STOP key
UP key
DOWN key
4.1.2

Operation via sensors

Up to 16 dispatchers (sensors, hand transmitters) can be programmed in the BiRec On/Off
remote-receiver.
Permissible sensors are:
BiSens Sun-Solar, BiSens SWR-230V, BiSens SW-Solar and BiSens SW-230V.
Only the light telegrams are evaluated from BiSens SWR-230V, BiSens SW-Solar and the
BiSens SW-230V.
• The last command to be received is executed. The BiRec On/Off only reacts to the hand
transmitter if the automatic function is switched off. In this case, the BiRec ON/Off does
not react to sensor and time switching commands, except to prioritised alarm and clock
commands.
• The BiRec ON/Off controls the dimming function of the activated sensors. Double
commands (double UP or double DOWN) are handled like "simple" positioning
commands (UP or DOWN). I.e. The BiRec On/Off is principally unsuitable for ventilation
and intermediate position moving strategies. Switching times never limit themselves
independently. Automatic STOP commands are ignored.
• Switching from manual operation to automatic operation resets all sensor functions.
• Central channel switching commands are ignored.
BiConnect BiRec On/ Off
Assembly and installation instructions/ Notice de montage et d'installation
We reserve the right to make technical changes/ Sous reserve de modifications techniques
OFF (fixed)
ON or OFF, according to programming
direction
OFF or ON, according to programming
direction
Version 1
Item number/
Numéro d'article 119759-0000 Page 6/20
2016-01-01