Operating Instructions; Control Panel - Danby DBC039A1BDB Guide D'utilisation Et D'entretien

Operating Instructions

CONTROL PANEL

1. Run: Indicator light illuminates to signify that the cooling mode is currently in operation.
2. Set Temperature Display: Display screen shows the temperature setting.
3. Cabinet Temperature Display: Display screen shows the current cabinet temperature.
4. °C/°F: Adjacent indicator light denotes which scale of temperature is displayed.
5. Up (+) Button: Used to raise the temperature (warmer) in 1° degree increments.
6. Down (-) Button: Used to decrease the temperature (colder) in 1° degree increments.
7. Light Switch: The 'I' position will provide continuous illumination. The 'O' position will provide illu-
mination only when the door is open.
• To switch the display between the Fahrenheit (°F) and Celsius (°C) scale, depression the UP(+)
and DOWN(-) control buttons simultaneously for approximately fi ve (5) seconds.
• The temperature range can be set as low as 41°F (5°C) or as high as 64°F (18°C) to suit your
specifi c storage requirements. Each depression of the UP(+) or DOWN(-) button will allow you to
adjust the temperature in 1° degree increments within the aforementioned range.
• In the event of a power failure, wait 3 to 5 minutes before restarting the unit.
5