Assembling The Fuel Enrichment Solenoid; Adjusting The Fuel Enrichment Solenoid - Yamaha F6AMH Manuel D'entretien

FUEL ENRICHMENT SOLENOID (F8CW)
ASSEMBLING THE FUEL ENRICHMENT
SOLENOID
Install:
Link joint 1


Plunger 2


Spring pin 3


NOTE:
Install link joint 1 so that it is in the
direction shown in the diagram in relation
with plunger 2 and solenoid coil 4.
ADJUSTING THE FUEL ENRICHMENT
SOLENOID
NOTE:
If the fuel enrichment solenoid has been
disassembled, adjust after installing it to
the intake system.
Adjust:
Fuel enrichment solenoid


Refer to "ADJUSTING THE FUEL
ENRICHMENT SOLENOID" on page
4-9.
4-15