Télécharger Imprimer la page

Liens rapides

•PROGRESS
'LIGHTINGN
CAUTION: Risk of fire. Min. 900C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
WARNING - If any Special Control Devices are used with this Fixture, Follow the Instructions Carefully to assure full
compliance with N EC
requirements.
CAUTION - All glass is fragile, use care when handling Glass component(s) and or Lamp(s)
WARNING - To comply with the National Electrical Code and IJnderwriters Laboratories requirements, when installed
outdoors, or in wet locations, the edge of the wall plate coming in contact with the mounting surface, must be sealed with
a latex waterproof caulking to prevent water from entering the outlet box
CANOPY
MOUNTING
1
5
(NOT FURNISHED)
(NO INCLUIDA)
(NON FOURNIE)
WHITE, MARKED OR
WHITE SUPPLY
WIRE
RIBBED
UL LISTED
WIRE NUTS
BLACK SUPPLY
BLACK OR SMOOTH
WIRE
FIX URE WIRE
BARE COPPER
OR
BARE COPPER
GREEN GROUND
GREEN
FIXTURE
GROUND
WIRE FROM SUPPLY
OR
BARE COPPER
OR
GREEN
SCREW
GREEN
GROUND
WIRE
P560151
Customer
Sennce.
1-800-447-1723
Assembly
CAUTION:
Read instructions carefully and turn electricity off at main
circuit breaker panel before beginning installation.
560151,
If there are any questions, contact a Qualified Electrical Contractor.
& WIRE
CONNECTION
ASSEMBLY
WIRE
OR
WIRE
GROUND
P560152
& Installation
560152
STEPS
B
PAGE
1 of
2
Instructions
E
F
D
c
SPEC
NO
93112952
06/11/19
loading

Sommaire des Matières pour Progress Lighting 560151

  • Page 1 CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. 560151, 560152 CAUTION: Risk of fire. Min. 900C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING - If any Special Control Devices are used with this Fixture, Follow the Instructions Carefully to assure full compliance with N EC requirements.
  • Page 2 Instructions d'Assemblage et Installation MISE EN GARDE: Lire les instructions avec soin et couper Ie courant au disjoncteur central avant de commencer l'installation. MISE EN GARDE: Risque d'incendie. Min 900C conducteurs d'almentation. Consulter un électriaen qualifié pour assurer conducteur de circuit de dénvatlon AVERTISSEMENT - S'll y a d'autres mécan•smes régulateurs qul s'emplo•ent avec ce dispositif,...

Ce manuel est également adapté pour:

560152