Progress Lighting 5721 Instructions De Montage Et D'installation
*PROGRESS
LIGHTING
WARNING • To comply with the National Electric Code and Underwriters
plate coming in contact with the mounting surface must be sealed with a latex waterproof caulking to prevent water from
entering the outlet box.
WARNING - If any Special Control Devices are used with this Fixture, Follow the Instructions Carefully to assure full
compliance with N.E.C. requirements.
CAUTION - All glass is fragile, use care when handling Glass Shade and lamps.
D
c
ASSEMBLY
STEPS
2
3
4.
5
Assembly
& Installation
CAUTION:
Read instructions carefully and turn electricity off at main
circuit breaker panel before beginning installation.
5721, 5722, 5723
If there are any questions, contact a Qualified Electrical Contractor.
WHITE SUPPLY
WHITE OR IDENTIFIED
WIRE
FIXTURE
UL LISTED
WIRE
BLACK SUPPLY
PLAIN OR BLACK
WIRE
BARE, OR GREEN
BARE, OR GREEN
GROUND
WIRE
FIXTURE
GROUND
FROM SUPPLY
WIRE
OR
BARE, OR GREEN
GREEN
SCREW
GROUND
WIRE
FROM SUPPLY
PAGE
Laboratories requirements, the edge of the wall
WIRE
NUTS
GROUND
1
of
2
Instructions
(NOT FURNISHED)
(NO INCLUIDA)
(NON FOURNIE)
SPEC.NO
022493
04/20/18
Manuels Connexes pour Progress Lighting 5721
Sommaire des Matières pour Progress Lighting 5721
- Page 1 CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. 5721, 5722, 5723 WARNING • To comply with the National Electric Code and Underwriters Laboratories requirements, the edge of the wall plate coming in contact with the mounting surface must be sealed with a latex waterproof caulking to prevent water from entering the outlet box.
- Page 2 Instrucciones de ensamblaje e instalaciön Precauciön. Lea cuidadosamente las instrucciones y desconecte la electricidad del cortacircuitos principal antes de iniciar la instalaciön. ADVERTENCIA - Para cumphr con el codigo Electrico Nacional y los requistos de los Laboratorios Underwriters, para instalaaoes al exterior o en sitios humedos, es necesario...