Basic Working Techniques; Transport And Storage - Husqvarna PP490 Manuel D'utilisation

Basic working techniques

Wall saws (blade/wire)
The following can be operated using the control levers on
the remote control:
• Longitudinal feed, the dial guides the saw unit's
movement along the rail.
• Arm feeding, the dial guides the pivot arm's movement
for changing of the cutting depth.
• Rotation of the blade/wire, controls the blade/wire
speed. Back arrow button, is used as a double
command when starting the blade's rotation. Start the
rotation of the blade/wire by holding the "back" button
in while turning the rotation control clockwise. The
rotation speed is controlled with a potentiometer.
MENU SYSTEM
OK
ON/OFF
0
OK
ON/OFF
0
OK
ON/OFF
0
• To switch off the blade/wire rotation, turn the blade
rotation control anti-clockwise back to its zero
position.
• Read through the manual supplied with the wall saw
for further instructions in sawing technique.

Transport and storage

• Always switch of the power pack and pull out the
electric cable before moving the equipment.
• Secure the equipment during transportation in order
to avoid transport damage and accidents.
• Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
• Store the machine and its equipment in a dry and frost
proof place.
Do not expose the unit to temperatures below -77 °F
•
or over 122 °F or to direct sunlight.
OK
ON/OFF
0
English
–
15