Speaker Functions - LEXIBOOK BT350 Série Mode D'emploi

BT350seriesIM1035_9Jan_V10.indb 8
1. Activate the Bluetooth ® function on your personal device (smartphone,
MP3 player, etc.). Please refer to your device's instruction manual on how to
activate this function.
2. Turn the speaker on to activate the auto-detection of a nearby device. The
LED flashes blue and red during pairing.
Notes:
- If pairing is not automatic, please select "BT350" in the Bluetooth ® list.
- When turned on, the speaker automatically searches for the device it has
previously synchronized with.
- If no device is detected, the speaker will start pairing a new device.
- If your Bluetooth ® device requires a password, the default password is 0000.

SPEAKER FUNCTIONS

Play/Pause
Press the on/off button (3) to play or pause audio files.
Notes: Some music players do not fully support Bluetooth ® audio controls.
Play/pause, previous and next buttons on the Bluetooth ® speaker may
not respond. The music player may also turn off. To get the best control
experience in the said player, use the on-screen track controls of your music
player rather than those on the speaker.
CAUTION: Too high volume, can damage your hearing. For this reason,
please turn the volume down.
Speaker Phone
1. Press the call button (3) once to answer calls.
2. To reject a call, press and hold call button (3) for 2 seconds.
3. To end a call, press the call button (3) once.
4. To redial a number, double press on the call button (3).
LED Status
- The LED alternates between red and blue during searching and pairing.
- The LED lights up red and blue simultaneously for 2 seconds during power
on and power off.
- The LED blinks twice in blue every 3 seconds when speaker is paired.
- The LED blinks three times in red every 15 seconds when the battery is low.
- The LED blinks once in blue every 3 seconds when devices are not paired.
- The LED lights up blue when line-in is in use.
Speaker (without Bluetooth ® )
Connecting to an audio player
1. Connect the 3.5mm audio cable to your player.
2. Connect the other end of the cable to the speaker's audio in jack (5). The
LED (1) lights up blue.
3. Click on your device's play button to make the sounds come out of the
speaker and listen to your desired audio file.
4. You can also listen to audio files from Internet. Open your internet browser
and select an online player.
5. To turn the speaker off, unplug the cable from the speaker. The LED (1)
turns off.
Connecting to a computer
1. Connect the 3.5mm audio cable to your computer.
2. Connect the other end of the cable to the speaker's audio in jack (5). The
LED (1) lights up blue.
PAIRING
8
3. Open a
to make t
file.
4. You ca
and selec
5. To turn
turns off.
• Bluetoo
• Speake
4Ω±15%,
• Support
• Powere
• With 3.5
• With US
• Playing
• Standby
• Low bat
• Effectiv
We, Lexib
2, avenue
91953 Co
Declare u
Kind of p
Type des
Is in com
EN 6006
EN 5501
EN 5502
EN 6100
EN 6100
EN 300 3
EN 301 4
EN301 4
EN 6247
We hereb
EMC Dire
and with
Yiu Wai M
Product D
30/01/20
09/01/2015 12:14 PM