Technical Information; Supply Pressure - GF DSR 500-1 Manuel D'utilisation

2.2 Technical Information

Version
nominal stroke
voltage of the working resistance
auxiliary energy, pneumatic
air delivery* linear drive
air delivery* rotory drive
ambient temperature
control signal
auxiliary energy, electric
adjustment of stroke and zero point
internal air consumption
configuration
air quality
Actuation gas
mounting to control valve
pressure supply port
protection class acc. DIN 40050

2.3 Supply Pressure

24
DSR 500
2,5 V
0/4 - 20 mA
24 VDC
not oiled, dry industrial air, content of solid < 30µ,
pressure dew point 20 K under the lowest ambient temperature
compressed air or non flammable gases (nitrogen, CO2,...)
standardized mounting kits (also with optical position indicator)
IP 65 (additional over pressure in the body with scavenging air)
The supply pressure is connected to port "P" (G1/8").
It must not exceed 6 bars, malfunctions might occur
then.
Air quality:
Non-oiled industrial air, solid content < 30 µm (1200
µinch), pressure dew point 20 K below lowest
ambient temperature.
P
DSR 500 AS-I
3 - 28 mm
4 - 6 bar
40 Nl/min.
100 Nl/min
-20 up to +75° C
Single Slave, Slave Profil S - 7.3.4
supply with AS-I
self-learning
none
with PC-Software
G 1/8"
-