Harman AKG DMM 4/2/4 Stereo Mode D'emploi page 50

Operation
50
NOM Attenuation
The number of enabled channels is known system-wide. The attenuation per enabled channel
can be adjusted individually on each device and is therefore local.
Last Mic On
This function forces the system to leave the last enabled channel activated and not to disable
it. This means that after at least one channel has been enabled, one channel in the system is
always active. This function acts system-wide. Last Mic On can be set on each device. The
devices are OR connected according to this function. This means that if you wish to switch off
this function in a cascaded system, this function must be deactivated on all devices on which
the user has activated them.
Pan/Balance
The rotary knobs for the input channels act locally on the input to the relevant device and
adjust the panorama setting of the corresponding input signal in the "system main".
The rotary knob for Master Out controls the panorama setting of the local main.
DMM 4/2/4 Stereo
www.audiovias.com