L'AT14LTE amplifica la banda passante di 14dB e deve essere instal ato prima di ogni altro
dispositivo attivo non LTE per evitare 'amplificazione di segnali nella banda 791-862 MHz.
AT14LTE amplifier Installation
The gain of AT14LTE is 14dB, the amplifier must be installed before any other active non-LTE
device to avoid the amplification of signals in the 791-862 MHz band.
AT14LTE Installation de I'amplificateur
Le AT14LTE amplifie a bande passante par 14dB et doit étre installé avant tout autre appareil
non-LTE actif pour éviter I'amplification des signaux dans Ia bande 791-862 MHz
Antenna
VHF+UHF
Antenne
AT14LTE
Derivatore
Tap
Dérivateur
• Senonsi intende distribuire il canale 60éconsigliabile l 'utilizzo del'amplificatore AT14LTE5g chegarantisce u namaggior a ttenuazione deisegnali L TE
• It you don't plan to distribute the cnannel 60 it is recommendedto use the AT14LTE59ampllfier that ensures better attenuation on LTEsignals
• Sivousnlavezpas'intention d e distribuer le cana60estrecommandé d' u tiliserl'amplificateur AT14LTE5g quiassure unemeilleure attenuation d usignal L TE
Page 1
• It you don't plan to distribute the cnannel 60 it is recommendedto use the AT14LTE59ampllfier that ensures better attenuation on LTEsignals • Sivousnlavezpas'intention d e distribuer le cana60estrecommandé d' u tiliserl'amplificateur AT14LTE5g quiassure unemeilleure attenuation d usignal L TE ACARRO fracarro.com s hap...
Page 2
AT14LTE5S -FRACARRO AT14LTE60 Italiano Attenzione Per evitare infiltrazioni d acqua nel balun dell' antenna e per permettere 'installazione del copri connettore, si consiglia di non installare I amplificatore direttamente sul connettore F English Warning To prevent seepage of water into the balun of the aerial and to allow the installation of the...