Installing The Product - Duux Whisper Flex Mode D'emploi

• Keep children away from playing with the
device.
• Do not pull the unit along by the cord.
• If the supplied power cord is damaged it must
be replaced by an electrician or qualified
person to avoid any hazard.
• T he mains supply must confirm to the
specification shown on the rating label on the
back of the device.
• C lose doors and windows for optimal efficiency.
• Keep curtains or blinds closed during the
sunniest hours of the day.
• Do not turn on the device if you have
discovered damage to the appliance, cord
or plug or if the device is malfunctioning or if
there are signs of any other defect. Return the
complete product to the point of purchase or
to a certified electrician for inspection and/or
repair. Always ask for original parts. The device
(incl. cord and plug) may only be opened and/or
repaired by properly authorized and qualified
persons.
• Only a licensed professional is allowed to
dismantle or modify the device.
• This device is to be used only for its prescribed
purpose. Any other use is deemed to be a
cause of misuse. The user/operator, not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this
6

Installing the product

Place the rear grill (part 5) over the motor (part
1
4) and tighten with the locking ring (part 6).
Attach the fan blades (part 5) to the motor.
2
Note: make sure that the grooves in the fan
blades are slid over the pins
Use the plastic screw (part 6) to secure the fan
3
blades.
Note: turn the screw anticlockwise firmly to
secure it.
Fit the front grill (part 5) and rotate it a little,
4
clockwise, until the arrow on the grill lines up
with the left-side marker.
CLOSE OPEN
Fit the supplied screw (part 6) to the underside
5
of the grill and connect the two halves firmly
together.
Attach the motor to the connector input on
6
the base unit (part 2). Refer to point 7 for
attachment of extension tube.
motor
base
7