Ec Compliance Declaration - Kukirin M4 Max Manuel D'utilisation

13.Troubleshooting
EN
Malfunction Code
Motor fault E-01
E-02
Throttle fault
Controller failure
E-03
Under-voltage E-05
Panel / controller failure E-06
Panel / controller failure E-07
Motor is overheated E-09
14.Warranty and client support
Prohibition: Do not adopt any accessory or additional item that are not approved by the manufacturer so as
to avoid corresponding problems.
Warranty period:
If this product should fail or be damaged, it can be repaired, replaced or returned free of charge upon confirmation
by KuKirin after-sales center. In any of these cases, please contact the product dealer and conduct operation as per
instructions. At that time, you need to produce accurate, complete and valid purchase information or invoice.
Customer service:
If component repair or replacement is necessary, please contact our authorized service center or dealer for support.
Warranty coverage:
Warranty contents
Controller, instrument, motor, lithium battery and charger, scooter
frame, front body, rear wheel hub, brakes, folding mechanism,
telescopic tube, front fork, brake system, throttle dial, etc.
16
Solutions
Inspect if the motor or the motor wires are damaged or broken or not; if yes,
please replace the motor.
Replace the throttle and try it again.
Replace the controller and try it again.
There is a low battery. Please charge the battery and try it again.
Replace the instrument / controller and try it again.
Replace the instrument / controller and try it again.
Commission the motor again after it cools down.
Warranty period
1 year

15. EC compliance declaration

Manufacturer Jinhua Xingzhi Intelligent Technology Co., Ltd.
Third Floor, Building 1, West Side, No. 159 Xinrong Road, Sumeng Township, Wucheng
Address
District, Jinhua City, Zhejiang Province, China
Description
Electric dual-wheel scooter,
Additional information M4 Max Electric Scooter
The contents concerning this declaration comply with the requests of the EU directives as
follows:
Comply with the Machinery Directive (2006/42/EC):
EN ISO 12100:2010,
EN 60204-1:2018.
Comply with the Low Voltage Directive (2014/35/EU):
EN 17128:2020.
Comply with the EMC Directive (2014/30/EU):
Declaration
EN IEC 55014-1:2021,
EN IEC 61000-3-2:2019+A1:2021+A2:2024,
EN 61000-3-3:2013+A1:2019+A2:2021+AC:2022-01,
EN IEC 55014-2:2021.
Comply with the RoHS 2.0 Directive (EU) 2015/863 and (EU)2017/2102:
EC 62321-3-1:2013,IEC 62321-4:2013+AMD1:2017,IEC 62321-5:2013,
IEC 62321-6:2015,IEC 62321-7-1:2015.IEC 62321-7-2:2017,
IEC 62321-8:2017.
Mark Zhang
Name
Company title Director
Signature
KuKirin
EN
17