Connection To The App; How To Connect To The App; Maintenance And Cleaning - Create Warm Wall Pro Manuel D'instructions

H OW TO CON N ECT TO T H E APP
1. Install the CREATE HOME app and create a user account.
2. Select the time zone and click to get the verification code.
3. Enter the verification code received.
4. Set a login password and log in with your account in the app.
5. Click "Add Device" (+) in the corresponding heater category.
6. Press and hold the mode selection button
ing quickly.
7. Click "Confirm" while the indicator light on the device flashes quickly.
8. Enter the password for your Wi-Fi network and confirm.
9. While connecting, make sure your router, mobile phone and device are as close as possible.
Afterwards, your heater will have been successfully added to your CREATE HOME app.
Warning! Always disconnect the power supply before cleaning the appliance.
• Using a soft, damp cloth, with or without a mild soap solution, carefully clean the exterior
surface of the product. Dry it with a clean, dry cloth. Do not pour water on or into the unit.
• To store your product out of season, we recommend using the original box (or the appropri-
ate size). It is important to keep it in a dry and safe place.
• Do not allow water or other liquids to get inside the product, as this could create a fire and/
or electric shock.
• We also recommend periodic cleaning of this appliance by lightly wiping a vacuum cleaner
nozzle over the guards to remove any dust or dirt that may have accumulated inside or on
the unit.
CAUTION: Do not use harsh detergents, chemical cleaners, or solvents as they may damage
the surface finish of plastic components.
E NGL I SH
12

CONNECTION TO THE APP

• The CREATE HOME app is available for Android and iOS (search for
the app on Google Play or App Store or scan the QR code). Depending
on the provider, there may be costs involved in downloading the app.
• This device allows you to operate the device over your home network.
A prerequisite is a permanent Wi-Fi connection to your router and the
free CREATE HOME app.
• We recommend disconnecting the appliance from the power source
when you are away from home to avoid inadvertent switching on
while you are away.
• You can also select the "Scan QR" option to add the device directly.

MAINTENANCE AND CLEANING

for 3 seconds. The wifi indicator starts flash-