Powering On/Off - Soundcore Life Note Mode D'emploi

Masquer les pouces Voir aussi pour Life Note:
Table des Matières
Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Charging
Remove the protective film from the earbuds when using for the first time.
Fully charge both the earbuds and the charging case before the first-time using.
To prevent damage, use the provided USB-C cable.
Fully dry off the earbuds and the USB port before charging.
1
R
R
LED behaviour (Earbuds & Charging case)
Steady red
Low battery
Steady white
Being Charging
Fully charged
Light off
Remaining battery >10% (when in use)

Powering On/Off

The earbuds will automatically power on when taken out of the charging case and power off
when placed back into the charging case.
ON
To manually power on, press the multi-function button on either one of the earbuds.
To manually power off, press and hold the multi-function button on either one of the
earbuds for 3 seconds.
01 EN
2
OFF
LED behaviour (Earbuds)
ON
Steady white for 1 second
OFF
Steady red for 1 second
Pairing
True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken out of the
charging case.
LED behaviour (Earbuds)
Breathing white
Steady white for 1 second
When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
When powered on and connected, place either one of the earbuds into the charging case
and close the case, you can keep using the other one.
When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
When you are on a call, press and hold the multi-function button on either one of the
earbuds for 1 second, then this earbud will switch to be the primary earbud.
When you are on a call, place either one of the earbuds into the charging case, the
microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-out screen.
TWS connecting
TWS connected
EN 02
Table des Matières
loading

Table des Matières