Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Energy metering
#
Code
[A.2.2.9]
[D-08]
Optional external kWh meter 1:
[A.2.2.A]
[D-09]
Optional external kWh meter 2:
4.2.4 Quick wizard: Capacities (energy metering)
#
Code
[A.2.3.1]
[6-02]
Booster heater capacity [kW]
[A.2.3.6]
[6-07]
Bottom plate heater capacity [W]
4.2.5 Space heating/cooling control
Leaving water temperature: Main zone
#
Code
[A.3.1.1.1]
N/A
Set point mode:
[A.3.1.1.3]
[1-00]
Weather-dependent curve (heating):
[1-01]
T t
[1-02]
[1-03]
[1-02]
[1-03]
[A.3.1.1.4]
[1-06]
Weather-dependent curve (cooling):
[1-07]
T t
[1-08]
[1-09]
[1-08]
[1-09]
EHVH/X04+08 + EHVH/X16
Daikin Altherma - Low Temperature Split
4P313772-1B – 2012.05
Description
0 (No): NOT installed
1: Installed (0.1 pulse/kWh)
2: Installed (1 pulse/kWh)
3: Installed (10 pulse/kWh)
4: Installed (100 pulse/kWh)
5: Installed (1000 pulse/kWh)
0 (No): NOT installed
1: Installed (0.1 pulse/kWh)
2: Installed (1 pulse/kWh)
3: Installed (10 pulse/kWh)
4: Installed (100 pulse/kWh)
5: Installed (1000 pulse/kWh)
Description
Description
0 (Absolute): Absolute
1
(Weather
dep.):
Weather-dependent
2 (Abs + scheduled): Absolute +
scheduled (only for leaving water
temperature control)
3
(WD
+
scheduled):
Weather-dependent + scheduled
(only for leaving water temperature
control)
[1-00]
[1-01]
T
:
Target
leaving
water
t
temperature (main)
T
: Outdoor temperature
a
[1-06]
[1-07]
T
:
Target
leaving
water
t
temperature (main)
T
: Outdoor temperature
a
Leaving water temperature: Additional zone
#
Code
[A.3.1.2.1]
N/A
[A.3.1.2.3]
[0-00]
[0-01]
[0-02]
[0-03]
[A.3.1.2.4]
[0-04]
[0-05]
[0-06]
[0-07]
Leaving water temperature: Delta T emitter
#
Code
[A.3.1.3.1]
[9-09]
T a
[A.3.1.3.2]
[9-0A]
T a
4 Configuration
Description
Set point mode:
0 (Absolute): Absolute
1
(Weather
Weather-dependent
2 (Abs + scheduled): Absolute +
scheduled (only for leaving water
temperature control)
3
(WD
+
scheduled):
Weather-dependent + scheduled
(only for leaving water temperature
control)
Weather-dependent curve (heating):
T t
[0-01]
[0-00]
[0-03]
[0-02]
T
:
Target
leaving
t
temperature (additional)
T
: Outdoor temperature
a
Weather-dependent curve (cooling):
T t
[0-05]
[0-04]
[0-07]
[0-06]
T
:
Target
leaving
t
temperature (additional)
T
: Outdoor temperature
a
Description
Heating: required temperature
difference between entering and
leaving water.
In case a minimum temperature
difference is required for the good
operation of the heat emitters in heating
mode.
Cooling: required temperature
difference between entering and
leaving water.
In case a minimum temperature
difference is required for the good
operation of the heat emitters in cooling
mode.
Installation manual
dep.):
T a
water
T a
water
11
Publicité
Chapitres
Table des Matières
