Burner Description - Lamborghini Caloreclima Job 4 E Notice D'emploi

Contents

- Burner description

Burner description
JOB are single-stage, fully automatic,
monoblock type burners.
Burner head is designed to get the lowest
emissions in terms of NOx and unburnt
particles in order to maximize the heat
generator efficiency. Emissions can be
different respect to the ones recorded in
the lab because they depends a lot on the
generator on which the burner is fit.
The installer must comply with compulsory
rules. Avoid for instance dangerous
atmosphere or not ventilated rooms.
Technical label
Tampering, removal or absence of plate
burner or anything that not allow the
secure identification of the burner make
difficult for any installation and
maintenance activity.
Notes for the operator
The system should be inspected by a
specialist at least once a year. It is
advisable to take out a maintenance
contract to guarantee regular servicing.
For any other use, the authorization of Lamborghini is required.
WARNING
Scope of delivery
The burner is delivered in a modular system
of packagings i.e. separate set/box:
BBCH: Burner Body with Combustion Head
with flange.
- 1 bag including :
- multilanguage technical manual.
- wieland plug.
- screws, nuts and washer.
GT: separate Gas Train
KIT & ACS are managed and delivered separately
A1
10
5
cod. 3540003940 - Rev. 00 14/01/2025
NAME
JOB
MODEL
JOB 4
OPERATION TYPE
HEAD TYPE
L
E
KIT & ACS delivered separately
3
16
113
103B
F6
JOB 4
Gas
40 kW
1 stage
Short head
Long head
ErP version
A1 Siemens control unit
F6 Air pressure switch
M1 Electric motor
T1 Ignition transformer
Y Graduated rod for head adjustment
3 Air regulation in the burner head
5 Housing
8 Blast tube
10 Wieland socket
15 Burner flange
16 Reset key
103B Air regulation
113 Air intake
15
M1
www.lamborghinicalor.it
EN
E
Y
7