Appliance Description; Charging The Battery Pack - SilverCrest SSKB 2200 A1 Mode D'emploi

Appliance description

Seat cushion
Storage compartment for the battery pack
2
3 Connector plug of the seat cushion
Carrying handle
4
Battery pack
5
Connection socket of battery pack
6
7 Function button for the temperature levels
8 Function indicator of the battery pack
9 Connector power adaptor
Connector plug of the power adapter
10

Charging the battery pack

The battery pack
For safe and faultless operation of the appliance after making the electrical
connection, pay heed to the following advice:
TAKE NOTE
► Before connecting the appliance compare the connection data (voltage
and frequency) on the rating plate with that of your mains power supply.
This data must tally so as to avoid damage to the appliance.
► Ensure that the mains power cable is undamaged and is not running over
hot surfaces and/or sharp edges.
► Ensure that the mains power cable is not overtaut or kinked.
► Do not let the power cable hang over edges (trip wire eff ect).
► If you do not intend to use the seat cushion for a long period, disconnect
the battery pack
♦ Insert the plug of the power adapter
♦ Ensure that the battery pack
not lit up).
♦ Connect the connector plug of the power adapter
socket of the battery pack
blinks red and the battery pack
indicator of the battery pack
fully charged.
NOTICE
► Prior to initial use or after a prolonged period without use, the battery
pack
SSKB 2200 A1
5 is charged using the supplied power adapter.
from the connector plug
5
6
5 must be charged for about 3 hours.
3 .
9 into a mains power socket.
5 is switched off (function indicator
10
. The function indicator of the battery pack
is now being charged. When the function
5
8 glows green, the battery pack
8 is
with the connecting
8
5 is now
31
GB