Technical Characteristics - Fagor BC-500 Manuel D'utilisation

1. INTRODUCTION
Before using the scales for the first time,
read this manual carefully in order to use
them correctly and keep them in good
condition. Keep the instructions for later
reference.
2. PRODUCT DEFINITION (FIG. 1)
1. Measuring beaker
2. Base
3. Button
4. Button
5. button
6. Display
7. Battery compartment
Interference suppression: The
interference of this appliance has been
suppressed in accordance with interference
suppression standards.
Electromagnetic compatibility: This
appliance complies with the CEM
standards of electromagnetic compatibility.

3. TECHNICAL CHARACTERISTICS

- Maximum capacity: 3000 gr/ 6.6 lb: 04 oz/
1000 ml/ 132 fl.oz
- Division: 1g/0.1 lb:oz/ 1 ml/ 0.1 fl.oz
- Convertible: gr / lb:oz/ ml/ fl.oz
- Power supply: 1xCR2032
4. ICON DISPLAY (FIG. 2)
a) Volume display in fl'oz
b) Volume display in ml
c) TARA function icon
d) Selection arrows
e) Water mode
f) Milk mode
g) Oil mode
h) CUP butter mode
i) Volume display in lb:oz
j) Volume display in g
EN
5. ADJUSTMENT
1. Remove the cover from the battery
compartment in the scales handle.
There is a plastic strip between the
batteries and the contact that stops
the scales from coming on. Remove
the plastic to be able to switch on the
appliance.
2. Place the scales on a dry, horizontal
surface. Make sure it is stable.
6. FUNCTIONING
1. Press the
scales.
2. The display will come on showing all
the icons. (Fig. 2).
3. Press the
of measurement.
4. Press the
weight, water, milk or "CUP" margarine
mode.
NB: The scale on the measuring beaker
is for guidance purposes and does not
coincide with the real amount shown on
the display.
5. The scales are now ready for use. Try to
keep the object to weigh in the centre
of the measuring beaker. Read the
screen when the figure stops flashing in
this format:
6. Make sure the scales are displaying "zero"
before you start weighing. If not, press the
button.
7. If you have weighed a liquid, before
pouring the liquid from the beaker into
another container, remove the measuring
7
button to connect the
button to change the unit
button to select