Publicité
3
before the first use
Leave the appliance to stand for at least 3 hours before you insert the plug into the socket. Otherwise, you may damage the
compressor.
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic, polystyrene and cardboard) out of reach of children. Check the appliance
after unpacking for any damage, possible from transportation. Place the appliance on a flat and stable surface.
The installation procedure is given in the Installation Instructions.
Clean the appliance thoroughly, especially in the interior, before use (see Cleaning & Maintenance).
The installation and electrical connection must be carried out by a qualified technician, in accordance with installation
instructions and local regulations.
The appliance must be connected with a properly installed fused socket. The power supply (AC) and voltage at the
operating point must correspond with the details on the rating label of the appliance. The rating label is located on the inside
left of the appliance.
When the product is plugged in for the first time, the interior lights may turn on 1 minute late due to opening tests.
There can be an odor when you first switch on the appliance. It will disappear after the appliance starts to cool.
First clean the interior of the appliance. Use warm water and a neutral detergent. After cleaning, rinse the interior with clean
water and rub dry. Leave the appliance to dry for 1 to 2 hours.
4
how to operate the appliance
SETTING THE TEMPERATURE
The temperature set button allows you to set the temperature of
the appliance.
Use the temperature set button also for activating the super cooling
mode.
The appliance will cool continuously until the set temperature
has been reached. Allow the appliance to reach the required
temperature with no food in the larder. Usually this will take 2 to 3 hours. After that, you can set the required temperature
and fill the refrigerator with food.
Repeatedly press the set button until the indicator light of the required temperature lights up.
It may be set to any value ranging from MIN to MAX and supercool mode. As you press temperature set button from MIN to
MAX, the temperature decreases.
Humidity control
Selecting the correct humidity means food will not dry out and it can be kept longer.
High humidity
Slide humidity control to the left
Suitable for products
such as:
Some vegetables and fruit are sensitive to cold and unsuitable for refrigeration. These include:
• pineapple, guava, aubergine, avocado, mango, cucumber, paprika
• bananas, olives, tomatoes, passion fruit, potatoes, (water) melon
• pomegranate, citrus fruit, pumpkin, courgette
Low humidity
Slide humidity control to the right
Vegetables
Suitable for products
Mushrooms
such as:
interior light
temperature indicator
Fruit
Meat
Cheese
Butter
temperature
set button
min
eco
super
21
English
•
Publicité
