Publicité
Care and Maintenance
Care and Maintenance Instructions
To keep your robot running at peak performance, perform the procedures on
the following pages.
There are additional instructional videos in the iRobot Home App. If you
notice the robot picking up less debris from your floor, empty the bin, clean
the filter and clean the brushes.
Part
Care Frequency
Mopping Pad
Clean after a mopping
job
Bin
Wash bin as needed
Filter
Clean once a week
(twice a week if you have
a pet). Do not wash.
Charging Contacts
Clean every 2 weeks
Full Bin Sensor
Clean every 2 weeks
Front Caster Wheel
Clean every 2 weeks
Edge-Sweeping Brush
Clean once a month
and Multi-Surface
(twice a month if you
Brushes
have a pet)
Sensor, Camera Window
Clean once a month
and Pad Shelf
Note:
iRobot manufactures various replacement parts and assemblies. If you think
you need a replacement part, please contact iRobot Customer Care for more
information.
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
Cleaning the Mopping
Pad
Note:
You can clean your mopping
pads two ways: either by hand
washing, or in a washing machine.
HAND WASHING
Thoroughly wash the pad with
Replacement
warm water.
Frequency*
After 30 washes.
Every 2 months
MACHINE WASHING
Every 12 months
Wash using the warm cycle, then air
Every 12 months
dry. Do not put in dryer. Do not wash
with delicates.
Emptying the Bin
1
Press bin release button to
remove bin.
2
Open bin door to empty bin.
3
Place bin back in the robot.
Roomba Combo j7 Owner's Guide
EN
5
Publicité
