inventiv 202117 Notice page 24

202117 ROUTER 1500W
OPERATION INSTRUCTIONS
Note: Before using the tool, read the
instruction book carefully.
Intended Use
This tool is intended for routing grooves, edges, profiles
and elongated holes as well as for copy routing in wood,
plastic and light building materials, while resting firmly on
the workpiece.
1. SETTING THE DEPTH STOP (See Fig. A)
If your router comes with the depth stop not assembled,
be sure to fit the depth stop on the machine before use.
Loosen the fixing screw, insert the depth stop into the
hole of holder.
2. FITTING THE VACUUM ADAPTER (See Fig. B1,
B2, B3)
For the sake of your health and working environment,
always connect the machine to a vacuum cleaner. You
must fasten the vacuum adapter to the router base
with two screws (18) and connect a suction hose. The
suction hose can be connected to the vacuum cleaner
through an extraction adapter.
24
SAFETY AND OPERATING MANUAL