Technical Data; Accessories; Noise And Vibration Data; Vibration Information - Inventiv 202117 Notice

You must read operating instructions before using the tool. Keep operating instructions
with the tool. Keep operating instructions with the hammer, so that they may be referred to,
if necessary.

TECHNICAL DATA

Rated voltage
Rated power
No load speed
Collet size
Max. plunge depth
Protection class
Weight

ACCESSORIES:

Collet: 6/8mm
Parallel guide
Centering pin
Transparent protection shield
Transparent dust extractor
Spanner
Profile board
We recommend that you purchase your accessories from the same store that sold you the
tool. Choose the type according to the work you intend to undertake. Refer to the accessory
packaging for further details. Store personnel can assist you and offer advice.

NOISE AND VIBRATION DATA

A weighted sound pressure LpA: 88 dB(A)
A weighted sound power LwA: 99 dB(A)
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
202117 ROUTER 1500W
1pcs
1pc
1pc
1pc
1pc
1pc
1pc
2
= 7.08m/s
h
SAFETY AND OPERATING MANUAL
230V～50Hz
1200W
11,000-30,000/min
8mm
55 mm
/II
3.13kg
Kpa: 3.0 dB(A)
Kwa: 3.0 dB(A)
18