Télécharger Imprimer la page

Publicité

3) Slightly tilt up the engine and pull the
shallow water lever toward the tran-
som.
4) To return the engine to the normal
position, put the engine in Neutral,
then slightly tilt up the engine. Push
the shallow water lever down. Set the
tilt-lock lever to the lock position and
slowly tilt the engine down.
412016*
EMH10110

TILTING UP/DOWN

If the engine will be stopped for some
time, or if the boat is moored in shal-
lows, the engine should be tilted up to
protect the propeller and casing from
damage by collision with obstructions,
and also to reduce salt corrosion.
105031
cC
8 Before tilting the motor, follow the pro-
cedures under "STOPPING ENGINE".
Never tilt the motor while the engine is
running. Severe damage from overheat-
ing can result.
8 Do not tilt up the engine by pushing the
steering handle as this could break the
handle.
8 Keep the power unit higher than the pro-
peller at all times. Otherwise, water can
run into the cylinder, causing damage.
3-21
GB

Publicité

loading