AENO RC2S Mode D'emploi page 14

Masquer les pouces Voir aussi pour RC2S:
Table des Matières
1. Unplug the device before cleaning.
2. Remove the dust container or water tank from the vacuum cleaner.
3. Empty the contents of the dust container into the waste basket and empty
any remaining liquid from the water tank.
4. Clean the HEPA filter and pre-filter with a dry brush or cloth.
5. Remove and rinse the side brushes and fabric cover with warm water.
6. Remove hair and debris from the brush roll using the vacuum cleaner care
brush (included).
Dry the component parts away from heaters. Make sure all the parts are completely
dry before reinstalling.
Troubleshooting
1. The vacuum cleaner won't charge. Possible causes: the outlet is faulty; the
charging base is not plugged in; the contacts on the base and/or vacuum
cleaner are dirty. Solution: check the outlet by connecting another device to
it, if necessary, connect the adapter to another outlet; verify the connection
of the power adapter to the base and to electricity supply; wipe the contacts
with a dry soft cloth.
2. The vacuum cleaner returns to the base until cleaning is complete.
Possible cause: the battery charge is less than 20 %. Solution: charge the
vacuum cleaner.
3. Suction power has decreased. Possible cause: dust container is full; roller
brush is clogged. Solution: clean the dust container and/or roller brush.
WARNING! If none of the suggested solutions solve the problem, contact your
supplier or an authorized service center. Do not disassemble the device or
attempt to repair it yourself.
ASBISC reserves the right to modify the device and to make changes and additions to this
document without prior notice to users. This device complies with applicable safety
requirements. The warranty period and service life is 2 years from the date of retail sale of the
product. For date of manufacture see package. Manufacturer's information: ASBISC Enterprises
PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus. Tel.: +48732080077, e-mail:
info@asbis.com, asbis.com. Made in China. All trademarks and brands mentioned herein are the
property of their respective owners. Up-to-date information and a detailed description of the
device, as well as connection instructions, certificates, information about companies that accept
quality claims and warranties, are available for download at aeno.com/documents.
14
aeno.com/documents
Table des Matières
loading

Produits Connexes pour AENO RC2S

Ce manuel est également adapté pour:

Rc3sArc0002sArc0002s-ukArc0003sArc0003s-uk

Table des Matières