Bartscher FTH-30 G Mode D'emploi page 7

INSTRUCTION FOR USE
Attention!
Before the fi rst use of the device wash the device with water containing detergent and than dry with the
cleaning cloth. Never leave the device on without supervision!!!
!!! YOU MUST LUBRICATE THE TOP WITH VEGETABLE OIL AFTER EACH CLEANING !!!
Drawer for superfl uous fat
You must check the drawer regularly and empty it in time. You must clean the drawer after each switching
the device off.
Comments and recommendation
The devices with separated surface into 2 halves (FT-60) can be adjusted for different temperatures on both
of the halves. You can also use only one half. Switch on by main switch (D), turn the knob (A) and adjust
required performance. Pilot lamps (B) and (C) will light. Pilot lamp (B) lights when the device is connected to
the electricity. Pilot lamp (C) lights when the heating spirals are on. Pilot lamp (C) goes out when the device
reaches adjustedtemperature. Switch the device off by turning the knob (A) into position „0" and switch off
the main switch (D).
Maintenance
We recommend to have the device checked once a year by the professional service. Only qualifi ed or
competent persons can do interventions in the product.
Comments and recommendation
Use the device only under supervision.
C B A
D
6