Parameter Menu - Weller WXR 3 Traduction De La Notice Originale

Parameter menu

Standby Temp.
The soldering tools have a usage detection device
ring tool is not in use.
Standby time (temperature deactivation)
When the soldering tool is not in use, the tem-
sensor integrated tool detects the change in state
is moved.
AUTO OFF time (automatic switch-off time)
When the soldering tool is not in use, the soldering
tool heater is switched off when the AUTO OFF
time expires.
Temperature deactivation is performed indepen-
temperature is indicated and serves as a residual
Sensitivity
Option
low
normal
high
---
Max. hot air duration WXHAP
be limited in increments of 1 to between 0 and 300
optional footswitch is pressed.
Offset (Temperature-Offset)
The actual soldering-tip temperature can be
1.800.561.8187
Description
The tool is not supported
www.
Menu access
-
Menu access
Option Description
OFF
1-999 min
--- The tool is not supported
Menu access
Option Description
OFF AUTO OFF function is deactivated
1-999 min AUTO-OFF time, can be set indivi-
Menu access
Menu access
Option Description
OFF
1-300 s
Menu access
information@itm.com
.com
Tool parameters
Tool parameters
Tool parameters
Tool parameters
Tool parameters
Tool parameters
39