Parameter menu
Floating switching output 2
Floating switching output 2 is located at the COM 2 port.
Option
OFF
CH 1
CH 1+2
CH 1+2+3
Technical Data
Repair station
Dimensions L x W x H
Weight
Power consumption
Fuse
Temperature range
Equipotential bonding
USB port
Additional vacuum pump
1.800.561.8187
Description
Tool channel 1 controls the switching output
Tool channel 1 + 2 controls the switching output
Tool channel 1 + 2 + 3 controls the switching output
Notice
If the robot is at working temperature, the display will show – ok –.
WXR 3
273 x 235 x 102 mm
ca. 6,7 kg
230 V, 50 Hz T0053500699
120 V, 60 Hz WXR 3
100 V 50/60 Hz T0053500199
I, antistatic housing
III, Soldering tool
Controllable temperature range is tool-dependent
Via 3.5 mm pawl socket on back of unit
240 x 88 dots / Backlighting
Max. vacuum 0,7 bar
Max. hot air 15 l/min
Max. vacuum0,5 bar
www.
Menu access
information@itm.com
.com
Station parameters
43