Interface Com - Weller WXR 3 Traduction De La Notice Originale

Parameter menu
Pressure gauge threshold
nance interval of the desoldering tool. This is done
pressure gauge issues a warning signal when the
dependent on the suction nozzles used.
Adjustable
1.

Interface COM 1 / 2

Option
RS232
Air
Vac
PickUp
Floating switching output 1
Floating switching output 1 is located at the COM 1 port.
Option
OFF
ZeroSmog
42
1.800.561.8187
-400 mbar to -800 mbar
Description
The COM 1 port is used to drive an optional optotransmitter so that a KHE-P control
Description
RS 232 port remains functional.
ted.
Notice
message is evaluated by the WX HUB and, where applicable, a
message appears on the display .
www.
Menu access
- 2.
threshold" in the menu.
3.
LED switches back and forth between red and
green. Use the UP button to increase vacuum
and check whether the LED switches from
green to red.
4. Adopting the set change.
Menu access
Menu access
.com
Station parameters
Station parameters
Station parameters
information@itm.com
-