Wiring Instructions - Seb Avanti Mode D'emploi

Avanti SEB 2001.qxd 13/06/2001 15:21 Page 15

Wiring Instructions

WARNING : All appliances must be earthed
Important : The wires in this lead are coloured in accordance with the following codes :
E Green and
yellow or
green
N
Blue or
black
• Connect the Green/Yellow wire to the terminal in
the plug marked «E» or by the earth symbol
or coloured Green or coloured Green and Yellow.
• Connect the Brown wire to the terminal in the
plug marked «L» or coloured Red.
About your factory fitted plug
• The cord is already fitted with a plug
incorporating an appropriate fuse. If the plug
does not fit your socket outlet, see paragraph
below. Should you need to replace the fuse in the
plug supplied an appropriately rated approved BS
1362 fuse must be used (refer to wiring
instructions for fuse rating).
• If the plug supplied does not fit your socket
outlet, it should be removed from the mains lead
and disposed of safely. The flexible cord
Customer relations helpline
• For help and advice please call our customer
relations team on :
- 0845 602 1454 - UK
(calls charged at local rate)
- (01) 412 3000 - Ireland
(for U.K. only)
L Brown
or
Red
Fit correct fuse
Use cable gripper
• Connect the Blue wire to the terminal in the plug
marked «N» or coloured Black.
• A 13 amp fuse should be fitted when the
appliance is connected to a BS 1363A plug.
• Seek professional advice if you are unsure of the
correct procedure for the above.
(for U.K. only - supplied with selected models)
insulation should be stripped back as appropriate
and a suitable alternative plug fitted. The
replacement plug must be equipped with an
appropriate fuse.
• If the plug has external access to the fuse (non-
rewirable type plug) please note that the fuse
cover is an important part of the plug. Please
ensure that it is always refitted correctly. If you
lose this cover please do not use the plug. You
may contact Tefal UK Limited for a replacement.
Green and Yellow : Earth
Brown : Live
Blue : Neutral
15