Publicité
INSTRUCTIONS FOR USE
1. Before inserting the power plug into an electrical outlet, check that the power supply in your
area corresponds to the indications on the label affixed to the device.
2. Carefully remove the heater from its plastic wrapping and carton.
3. Please make sure the capacity should be 220-240V~, 50-60Hz.
4. Plug the plug into the wall outlet.
5. Turn on the device by selecting the desired setting.
"0" = "OFF".
6. Please operate the heater according to the control keys on the control panel or the remote
control.
USING THE HEATED RADIATOR:
Display symbol description:
：Heating
(Low heat one "
" light on, 1000W
High heat two "
" light on 2000W
temperature range 18-45℃.
Light flickering:
：Swing
"I": = "ON".
Turn on the power switch, LED display Environment
temperature, the appliance is standby.
2, there is a switch behind the appliance base, press the
"button", press the high temperature once, and then press the
fan once for 30 seconds, the appliance will be shut down.
3、All function need to be operated by remote control
4、After operation 10 minutes, the blue flickering light will be off.
Press any key to awake the appliance, the blue flickering
light will be on, then you can operate all function.
5、Fan keep working for 30 seconds when shutdown the
appliance(after heating)
Note: The indicator lights when corresponding function is
working
1x
CR2025 Lithium
26
Publicité
