Publicité
Slope function manual
Press the on/off key once to switch on
the laser.
Press and hold the on/off key for 3
seconds to switch on manual mode.
Press the slope key once to set the desired
slope on the X axis.
Press the up arrow button to increase the
percentage.
Press the down arrow button to decrease
the percentage.
Press the slope key again to set the desired
slope on the Y axis.
Press the up arrow button to increase the
percentage.
Press the down arrow button to decrease
the percentage.
Press the slope key again to confi rm the set
slope.
Note: In manual mode,
the laser does not check for
deviations!
Slope direction
EN
21
Publicité
