Publicité
1.Install the "Smart Life" app. Create a user account.
2.Activate the WIFI function in the settings of your appliance.
3.Place the appliance at a distance of about 5 meters to your router.
4.Long press the "Timer" button to start the network configuration, when
the WIFI indicator flashes, you can connect the WIFI. After 3 minutes, the
status will be canceled if there is no network configuration, and the
indicator light is off. If you need to re-connect the WIFI, long press the
"Timer" button to start the network configuration again, the WIFI indicator
will flashes again.
WIFI Connected
● Method 1
Connected via Bluetooth
Open the Bluetooth of your mobile phone or other device.
When WIFI indicator flashes, open "Smart Life" APP, the unit will
connected via bluetooth automatically.
● Method 2
When WIFI indicator flashes, select "Add Device"-"Large Home
Appliances"-"Portable Air Conditioner", and follow the instructions on
the display.
Check the status of the WIFI indicator and choose the correct status.
If the WIFI indicator flash rapidly, it can connected directly.
If the WIFI indicator flash slowly, press"Go to Connect" to connect the
WIFI named "SmartLife-XXXX", then back to the APP, the WIFI will
connect ok.
Remarks:
Once the appliance has been successfully connected, the WIFI lamp lights
up. Now you can operate the appliance using the app.
Press and hold the "Timer" button for about 5 seconds, the appliance
disconnect, the WIFI lamp lights off.
102
Publicité
