Before Each Use - Probasics K4 Deluxe Mode D'emploi

ASSEMBLY INSTRUCTIONS
Remove the wheelchair from all packaging including tape,
cardboard and plastic. Check all parts of the wheelchair for
damage before use. If any parts are missing or damaged,
DO NOT
attempt to use the wheelchair. If you do not
understand the manual, contact your dealer for a complete
explanation of the instructions, cautions and warnings.
Otherwise injury may result. Dealers or resellers are
responsible for providing this manual to any user or purchaser
of this device. Failure to provide this manual to a user
increases the risk of serious injury.

BEFORE EACH USE:

• Make sure the chair rolls easily and that all parts work
smoothly.
• Check for noise, vibration or any change in use. Changes may
indicate loose parts or wheelchair damage.
• Check to ensure wheel locks are in good working order.
• Make sure hand grips are
or twisted.
• Make sure the seatback is locked in the upright position.
• Make sure that the lap positioning belt (if applicable) is
securely attached to the wheelchair.
• If the wheelchair is damaged, discontinue use and contact
your dealer/distributor for authorized parts, repairs or
replacement.
CAUTION: DO NOT
any parts.
A
TO CLOSE/FOLD WHEELCHAIR
First, fold foot plates to vertical position. With both hands,
grasp the middle of the seat upholstery at the front and back
edge and lift up. Or, tilt chair to one side toward you and lift up
on seat rail.
use excessive force when installing
TO OPEN/UNFOLD WHEELCHAIR
Open wheelchair by tilting to one side toward
you and pushing down on seat rail until fully
opened. Ensure seat rails are fully cradled in
seat rail guides (Fig. A).
CAUTION:
fingers clear of moving parts to
avoid injury.
NOT
loose and cannot be moved
Keep hands and
9