Publicité
Additional Functions
Holiday Mode: You can program the thermostat to be on for a set temperature
for up to 30 days so that there is background heat in the house while you are
away. This can be found under the mode
section. You have the option to set
the number of days between 1-30 and a temperature up to 27°C.
Lock Mode: This option allows you to remotely lock the thermostat so no
changes can be made. This can be done by clicking the
symbol. To unlock
click the
symbol again.
Grouping devices: You can link multiple thermostats together as a group and
control them all simultaneously. This can be done by clicking on the
in the
top right corner and then clicking the Create Group option. If you have multiple
thermostats linked it will allow you to tick each one that you want to be in the
group and once you confirm the selection you will be able to name the group.
Sensor type and temperature limit
Click the Sensor type option and enter password (normally 123456). Then you
will be given 3 options:
(1) "Single built-in sensor" will only use the internal air sensor (DO NOT USE
THIS SETTING*)
(2) "Single external sensor" will only use the floor probe (ideal for bathrooms
where thermostat installed outside room).
(3) "Internal and external sensors" will use both sensors to read the
temperature (Most common option).
Once you have chosen the sensor type, check that "Set temp. max" option is
set to a suitable temperature for your flooring (typically 45°C).
*A floor probe must always be used with electric underfloor heating to protect
the flooring.
9
Publicité
