Control Panel; Display Panel - Danby DAP290BAW Manuel Du Propriétaire

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Light button: Press to set the desired light
brightness.
2. PM2.5 detection button: Press to display PM2.5
value. Press twice to display VOC value.

DISPLAY PANEL

1. True HEPA fi lter life progress bar
2. Pre-fi lter life progress bar
3. Child lock indicator
Replace
True HEPA
Check
Pre-filter
PM2.5 MOLECULES
PM2.5 molecules are small particulates in the air
that reduce visibility and cause the air to appear
hazy such as air pollution from cars.
When the PM2.5 feature is activated, the air purifi er
will measure the particles in the air and display the
current level.
3. Fan button: Press to set the fan speed.
4. Mode button: Press to set the desired mode.
5. Power button: Press to turn the air purifi er on or
off.
4. PM2.5 number display
5. PM2.5 level display
6. VOC quality indicator light
7. VOC level display
Clean Fair Poor
VOLATILE ORGANIC COMPOUNDS
Volatile organic compounds are a large group of
chemicals found in many consumer products such
as paint, varnishes, cooking oils, air fresheners, etc.
These can often be released into the air and can
pose health risks.
This air purifi er will regularly measure the VOC in
the air and display the ambient level on the display
panel.
5
Clean Fair Poor