Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
FILTER INSTALLATION
Ensure that the fi lter is properly installed before
using the appliance. Ensure that the air fi lter is
unplugged when installing the fi lter.
1. Remove the air inlet grill.
2. Remove the pre-fi lter by pressing the U-shaped
buckle and pulling outward.
3. Remove the true HEPA fi lter.
4. Remove the packaging from the fi lter.
5. Install the fi lter.
6. Replace the pre-fi lter by aligning the bottom and
pressing the top inward until it clicks.
7. Replace the air inlet grill by aligning the bottom
and pressing the top inward until it clicks.
8. Repeat this process on both sides of the air
purifi er for both true HEPA fi lters.
1
3
5
7
3
2
4
6
8
Publicité
Table des Matières
